02:00 Mon 19 May 2025
Oriole Resources PLC - Mbe Drilling Confirms Higher-Grade Gold Potential

The information contained within this announcement is deemed to constitute inside information as stipulated under the retained EU law version of the Market Abuse Regulation (EU) No. 596/2014 (the "
Oriole Resources PLC
('Oriole Resources' or the 'Company')
Mbe Drilling Confirms Potential for Zones of Higher-Grade Gold
Including 1.00m at 51.30g/t Au
Oriole Resources PLC (AIM: ORR), the AIM quoted gold exploration company focused on West and
Highlights
· Results from drillhole MBDD009 have increased the total mineralised gold ('Au') intersections from the maiden ('Phase 1') drilling programme to 137 (using a 0.20 g/t Au lower cut-off grade) (see Figure 1 and Table 1 below), including:
o 2.00m at 25.77g/t Au from 147.10m, including 1.00m at 51.30g/t Au.
o 11.20m at 0.50g/t Au from 66.60m, including 1.60m at 1.04g/t Au and 2.00m at 1.07g/t Au.
o 1.10m at 2.99g/t Au from 119.00m.
o 1.00m at 1.06g/t Au from 124.00m.
· Hole MBDD009 is located approximately 160m to the west of hole MBDD008, where a best intersection of 86.50m at 1.36g/ Au was reported last week. These results have extended the width of the mineralised corridor on this fence line to over 400m and continue to demonstrate the potential for narrower zones of higher-grade gold within, and proximal to, the wider, lower-grade envelopes.
· The fully funded Phase 1 drilling programme at the MB01-S target is over 60% complete, with 13 holes (MBDD001-013) drilled to date and a fourteenth hole (MBDD014) in progress.
· Results for holes MBDD010-012 are expected later this quarter, with samples from hole MBDD010 already on their way to Bureau Veritas in Côte d'Ivoire for fire assay analysis.
· The drilling programme is currently scheduled for completion in Q3-2025, and the Company anticipates publishing a maiden, pit-contained MRE in Q4-2025.
· Ahead of this, the Company plans for an independent consultant to produce a JORC Exploration Target estimation in Q3-2025 to provide earlier guidance on the resource potential of the Project. The Company believes that the Project could be mined by open pit mining methods.
Chief Executive Officer of Oriole Resources,
Figure 1. Interpretative cross section for fence line N872482 at MB01-S, with selected mineralised intervals from holes MBDD001, MBDD002, MBDD007, and MBDD008 (blue labels; previously announced on
Further Details
Mbe, with a licence area of 312km2, is an orogenic gold project located within the broader 2,266km2 'Eastern CLP' package of five contiguous gold focused exploration licences in the
At MB01, increased dilation at the sites of structural intersections (steeply dipping NNE and NNW trending shear structures) is believed to have resulted in enhanced levels of gold deposition at the northern target, MB01-N, and MB01-S, the southern target. Gold mineralisation at these targets comprises high-grade, sulphide-rich quartz veins, veinlets and breccias within wider envelopes of pervasive, lower-grade gold mineralisation.
After highly encouraging results from infill soil sampling, rock-chip sampling, and trench sampling, a fully funded maiden drilling programme commenced at the MB01-S target in late
A total of 3,966.20m has been drilled to date, with 13 holes completed (MBDD001-013) and a fourteenth hole (MBDD014) in progress. The Company today reports results for the ninth hole, MBDD009, located on fence line N872482, which was drilled towards the west (270˚). Results have delivered 12 gold mineralised intersections (Table 1, Figure 2), such as 2.00m at 25.77g/t Au, including 1.00m at 51.30g/t Au (the highest grading sample from the drilling programme to date), and 11.20m at 0.50g/t Au, including 1.60m at 1.04g/t Au and 2.00m at 1.07g/t Au. A review of the QAQC samples has confirmed that the data falls within acceptable limits of error.
The total number of gold-bearing intersections from the first nine holes in the programme, MBDD001-009, stands at 137. Other significant intersections from the programme to date include: 86.50m at 1.36g/t Au, including 39.40m at 2.00g/t Au, 6.00m at 2.24g/t Au, and 3.00m at 2.32g/t Au, and 8.50m at 2.25g/t Au, including 1.00m at 17.00g/t Au (MBDD008); 29.75m at 0.88g/t Au, including 17.30m at 1.35g/t Au, and 26.30m at 0.65g/t Au, including 10.90m at 1.08g/t Au from MBDD002; 24.20m at 0.45g/t Au including 3.00m at 1.27g/t Au (MBDD007); 8.00m at 1.00g/t Au and 4.24m at 8.12g/t, Au including 1.72m at 19.08g/t Au (MBDD003); 23.10m at 0.71g/t Au, including 7.20m at 1.02g/t Au and 2.00m at 2.48g/t Au, and 5.60m at 1.03g/t Au from 7.50m (MBDD005); and 13.80m at 0.61g/t Au, including 3.40m at 1.17g/t Au and 2.10m at 1.06g/t Au (MBDD006) (Announcements dated
Figure 2. Plan for Phase 1 drilling at MB01-S with a selection of best results to date from MBDD001 to MBDD009. Green dots denote holes drilled towards 090 degrees and blue dots are those drilled towards 270 degrees.
Table 1. Calculated intersections from Phase 1 holes MBDD009, using a 0.20g/t Au lower cut-off grade. Results greater than 1.00g/t Au are in bold.
Hole ID |
From (m) |
To (m) |
Au (g/t) |
Intersection* |
MBDD009 |
9.70 |
10.70 |
0.56 |
1.00m at 0.56g/t Au |
and |
34.15 |
35.30 |
0.54 |
1.15m at 0.54g/t Au |
and |
66.60 |
77.80 |
0.50 |
11.20m at 0.50g/t Au |
including |
69.50 |
71.10 |
1.04 |
1.60m at 1.04g/t Au |
including |
73.80 |
75.80 |
1.07 |
2.00m at 1.07g/t Au |
and |
99.35 |
100.60 |
0.33 |
1.25m at 0.33g/t Au |
and |
112.40 |
116.80 |
0.32 |
4.40m at 0.32g/t Au |
and |
119.00 |
120.10 |
2.99 |
1.10m at 2.99g/t Au |
and |
122.50 |
125.00 |
0.49 |
2.50m at 0.49g/t Au |
including |
124.00 |
125.00 |
1.06 |
1.00m at 1.06g/t Au |
and |
130.00 |
133.15 |
0.48 |
3.15m at 0.48g/t Au |
and |
147.10 |
149.10 |
25.77 |
2.00m at 25.77g/t Au |
including |
148.10 |
149.10 |
51.30 |
1.00m at 51.30g/t Au |
and |
161.30 |
162.45 |
0.22 |
1.15m at 0.22g/t Au |
and |
168.25 |
169.30 |
0.27 |
1.05m at 0.27g/t Au |
and |
193.40 |
194.50 |
0.41 |
1.10m at 0.41g/t Au |
* Intersections greater than 1.00m, calculated using a 0.20g/t Au lower cut-off grade and no more than 35% internal dilution. True widths are not currently known.
The results reported today have delivered the highest grading intersection to date at the Project, with mineralisation over this interval associated with steeply NE-dipping smoky quartz veins hosted by a quartz feldspar porphyry (QFP) unit, that is considered to have a strong spatial relationship with the gold mineralisation at Mbe (Figure 3).
These results have extended the width of the mineralised corridor on this fence line (N872482) to over 400m and continue to demonstrate the potential for narrower zones of higher gold grade within and proximal to the wider, lower-grade envelopes. The Company believes that the Project could be mined by open pit mining methods.
Figure 3. Highest grading interval of 1.00m at 53.10g/t Au, within the wider 2.00m at 25.77g/t Au intersection from MBDD009. High-grading material is associated with NE-dripping (NNW-trending) smoky quartz veinlets hosted by a QFP intrusion.
Results for holes MBDD010 to MBDD012 are expected later this quarter, with samples from hole MBDD010 already on their way to the Bureau Veritas laboratory in Côte d'Ivoire for fire assay analysis. Holes MBDD010 to MBDD012 have been drilled on a new fence line, N872572, which is located between fence line N872472 (100m to the south), and N872672 (100m to the north) and will enable better assessment of the gold distribution along strike.
This drilling programme is currently scheduled for completion in Q3-2025, and the Company anticipates publishing a maiden, pit-contained MRE in Q4-2025, which will be estimated in accordance with the JORC code. Ahead of this, the Company plans for an independent consultant to undertake a JORC Exploration Target estimation in Q3-2025.
Further information can be found in the Mbe JORC Table 1 disclosure on the following page of the Company's website https://orioleresources.com/projects/mbe/.
Competent Persons Statement
The technical information in this release that relates to Exploration Results and the planned exploration programme has been compiled by
Enquiries:
Oriole Resources Plc |
Tel: +44 (0)23 8065 1649 |
|
|
|
|
IFC Advisory Ltd (Financial IR & PR) |
Tel: +44 (0)20 3934 6630 |
|
|
|
|
Grant Thornton UK LLP |
Tel: +44 (0)20 7383 5100 |
|
|
SP Angel Corporate Finance LLP
|
Tel: +44 (0)20 3470 0470 |
Glossary and Abbreviations
Au |
Gold |
g/t |
Grammes per tonne |
JORC |
Joint Ore Reserves Committee |
JORC Code |
2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves |
km |
Kilometre |
km2 |
Square kilometre |
Mbe |
Mbe orogenic gold project |
m |
Metres |
MRE |
Mineral Resource Estimate |
Oriole Resources or the Company |
Oriole Resources PLC |
oz |
Troy ounce of gold |
Phase 1 |
Maiden diamond drilling programme at the MB01-S target, Mbe |
Project |
Mbe orogenic gold project |
QFP |
Quartz Feldspar Porphyry |
Notes to Editors
Oriole Resources PLC is an AIM-quoted gold exploration company, with projects in West and
At the Senala gold project in
For further information please visit www.orioleresources.com, @OrioleResources on X
[1] Oriole is currently undertaking a restructuring process that, once completed, will see it increase its holding from 80% to a 90% interest in the Project (announcement dated 17 October 2024).
RNS may use your IP address to confirm compliance with the terms and conditions, to analyse how you engage with the information contained in this communication, and to share such analysis on an anonymised basis with others as part of our commercial services. For further information about how RNS and the London Stock Exchange use the personal data you provide us, please see our Privacy Policy.
Proactive Investors Australia Pty Ltd ACN 132 787 654 (the Company, we or us) provides you with access to the content set out above, including any news, quotes,...
FOR OUR FULL DISCLAIMER CLICK HERE